Manual S Deep Dive: Selecting HVAC Equipment Based on Manual J Load Calcs- Part 2 of 2

Picking up where we left off in Part 1 (https://youtu.be/LEKEMI05dJE), Alex Meaney shows a design where a 3.5 ton, a 4 ton, and a 5 ton air conditioner all match a Manual J load, and explores the fine points of practical applications of the 3 rules of Manual S: 1. Select equipment that can handle 100% of the humidity load (latent heat) at minimum 2. Select equipment that does not exceed cooling load by too much (15% for single stage equip, 20% for 2-stage, 30% for variable capacity) 3. Select equipment that does not exceed total capacity by too much (but this rule must be broken in some cases)

Check out Alex Meaney's trainings: https://MeanHVAC.com

Watch Matt Risinger's video on the Build Show about my Manual J report tour: https://www.youtube.com/watch?v=CL-_VjlYnD0

Manual J Deep Dive (and Selecting HVAC Equipment with Manual S)- Part 1 of 2

Alex Meaney is my trainer when I level up on HVAC design calculations, and he came to visit us and share some of his expertise. Alex reveals what the J stands for and why you should never round up the tonnage from your Manual J software, and gives two rules for Manual S: 1. Never use AHRI data 2. Meet the latent load while not going too far over the sensible load (more in part 2) Check out Alex Meaney's trainings: https://MeanHVAC.com Watch Matt Risinger's video on the Build Show about my Manual J report tour: https://www.youtube.com/watch?v=CL-_VjlYnD0 Learn more about the Science of Homes: https://BuildingPerformanceWorkshop.com Watch the first-ever TV series about the Science of Homes: https://HomeDiagnosis.tv