Contact Us

Use the form on the right to contact us.

You can edit the text in this area, and change where the contact form on the right submits to, by entering edit mode using the modes on the bottom right. 

3398 Washington Road
Atlanta, GA 30344
USA

773.398.5288

Advanced residential construction and home improvement consulting and owner's advocacy in Atlanta, using the latest building performance diagnostic and modeling techniques and tools. Airtightness, insulation, HVAC, ventilation, moisture, and air quality and EMF consulting for homeowners and building professionals alike.

Videos/Podcasts/Articles

Home performance articles and stories from the field with internationally respected building forensics guru Corbett Lunsford at the Building Performance Workshop. Hear new episodes of the Building Performance Podcast, see new videos from the Home Performance YouTube channel, and learn all about how diagnostic testing (more than an 'Energy Audit') can make home improvement and new home construction a proven process!

Filtering by Tag: damper

3 Rules for Kitchen Make Up Air Systems: Planning Home Ventilation that Performs

Corbett Lunsford

The 3 rules are: don't blow make up air on people, don't blow it on surfaces, and keep the circuit short.

See our own full kitchen exhaust and make up system at: https://www.youtube.com/watch?v=bMkvCn1sGvk

See a demo of the calculators for sizing and selecting make up air at: https://www.youtube.com/watch?v=CSmwDGxtlHU

How to Maintain Your ERV: Pressure Check, Clean Filters, Evacuate the Bugs

Corbett Lunsford

Depending on where you live, where your fresh air intake is located, and how you run your ventilation system, your filters may get pretty gross in a matter of months. Here’s a few pointers on picking, and maintaining an ERV or HRV. Renewaire ERVs: https://www.renewaire.com/our-ervs/single-multi-family/

Broan ERVs: https://www.broan-nutone.com/en-us/fresh-air-systems/residential

Fantech SER150 installed here: https://shop.fantech.net/en-US/ser--150--fresh--air--appliance/p512709

Consult or coach with me via Zoom or in person: https://buildingperformanceworkshop.com/video-consulting

Join our Patreon membership and help guide our exploration of the Science of Homes: https://Patreon.com/HomeDiagnosisTV

How to Design and Install Kitchen Exhaust and Make Up Air Ventilation (Case Study)

Corbett Lunsford

Another installment in a series with Healthy Indoors Magazine (http://HealthyIndoors.com) follows the real-life, gritty planning and installation of the make up air system in a 1950's ranch over a crawlspace. The goal here is to install effective ventilation for the kitchen range with an exhaust hood AND make up air that will hopefully be the path of least resistance. We're using a Broan exhaust hood paired with an Aprilaire KV make up air damper, or an 8144NC (in an experimental application, as explained in the video). This house is not airtight by any means, and some might think make up air is overkill in an older home, but obviously we disagree enough to suffer through this.

Learn more about making your home healthier at: http://HealthyIndoors.com

Become a member and support our work educating people about the Science of Homes: http://Patreon.com/HomeDiagnosisTV

Get training or consulting with Corbett directly: http://BuildingPerformanceWorkshop.com

Home Ventilation for the 21st Century

Corbett Lunsford

There's a lot of mythology and misinformation about how to ventilate homes, and here Corbett shows, with the assistance of Phil Rivas from Fantech, how a perfect ventilation system gets built with 5 classes of HVI-certified equipment.

More on these products at: http://Fantech.net

More on HVI (Home Ventilating Institute): http://HVI.org

More on this build at: https://HomeDiagnosis.tv

How to Ventilate the #TinyLab (aka How To Pull Your Hair Out)

Corbett Lunsford

From the beginning, we've planned on this high performance tiny house on wheels (THOW) being airtight. That's a no-brainer, and everyone else wants airtight homes too, whether they know it yet or not. If you want to see how bright-eyed and bushy-tailed we were when we started planning the Tiny Lab, check out this webinar on the HVAC design:

After airtight construction, the next important step is always making sure the home is VENTILATED right, with fresh air in just the right amount. Too little fresh air, and you get staleness, odors, condensation, and a deep-seated disgusting feeling. Too much fresh air, and you're flushing conditioned air down the toilet.  The calculation for determining how much fresh air any house needs is called ASHRAE 62.2-2013, and you can see a simplified breakdown of that here:

And finally, you need to decide How Exactly You're Going To Do This.  That's always the sticking point, and designing and building this tiny house on our own has taught us that all day, every day. The devil's in the details. So began our ventilation adventure, and we immediately talked with our longtime friends at Panasonic, who recommended three pieces of equipment:

The ventilation strategy we were planning on initially was to exhaust air (20cfm minimum) from the shower (at the top right), which is only a few feet away from the kitchen (the L-shaped cabinet just below it), and supplying fresh air at the rear of the tiny house, in the underloft bedroom (at bottom).

We immediately faced a challenge with pressure equalization. Since this tiny house would be so airtight, the results of the blower door test would likely be less than 67cfm@50Pascals (2.0 ACH50). Without all the mumbo jumbo, that means that if I ran a regular exhaust fan in the bathroom or kitchen at anything close to 70cfm, I'd be sucking so hard on the house it would be as if a 20 mph wind was blowing on every single surface of the house (and that's a lot of surface- about 1000 sq. ft.)

Also, while the WhisperGreen bath exhaust fan can be 'manifolded' (which means connecting a duct system to the fan to distribute the air wherever you want it), the spot ERV cannot. A really cool MacGyver hack was recommended by Panasonic's technical team, which I think is awesome and could easily be done by anyone else per the instructions:

Although this is all very cool, it was deemed too iffy to work properly for the Tiny Lab because of all the customizations we're making with the on-wheels aspect, the tightness, the tiny size, etc. 

To keep this story from being ten pages long, let me just say that we are now on our FOURTH and final ventilation plan. Lawrence Berkeley National Laboratory's Brett Singer and our favorite dehumidification guru Lew Harriman both strongly urged us to use a fully-ducted HEAT Recovery Ventilator instead of the ENERGY Recovery Ventilator (which exchanges both heat and humidity). We'll be fighting the humidity the whole way, since every shower, cup of tea, and exhale will add to the moisture in the tiny house.

Also, we all agreed it would be infinitely better to exhaust the stovetop gases directly to outdoors with an ENERGY STAR kitchen exhaust hood.  We're keeping the pressure imbalances in check with a hole in the wall controlled with a mechanical damper that's activated by pressure imbalances.

Our final ventilation strategy is from our Product Partner BROAN, and we'll show you exactly how that miracle cure works when the system arrives next week!  Thanks for tuning in, and for your support in these trying times. Whew.